The ratings of five machinery stocks are down this week, according to the Portfolio Grader database. Each of these rates a “D” (“sell”) or “F” overall (“strong sell”).
Top 5 Rising Stocks To Own For 2015: Badger Meter Inc (BMI)
Badger Meter, Inc., incorporated on March 9, 1905, is a manufacturer and marketer of products incorporating flow measurement and control technologies serving markets globally. The Company's product lines fall into three categories: sales of water meters and related technologies to municipal water utilities (municipal water), sales of meters to various industries for water and other fluids (industrial flow) and sales of concrete vibrators and gas meter radios to markets (specialty products). Municipal water includes water meters and related technologies and services used by water utilities as the basis for generating water and wastewater revenues. Industrial flow includes products sold globally to measure and control materials flowing through a pipe or pipeline, including water, air, steam, oil, and other liquids and gases. Specialty products include sales of radio technology to natural gas utilities for installation on their gas meters, and concrete vibrators.
The Company's products are primarily manufactured and assembled in the Company's Milwaukee, Wisconsin; Racine, Wisconsin; Tulsa, Oklahoma; Scottsdale, Arizona; Nogales, Mexico; Neuffen, Germany; Brno, Czech Republic; and Bern, Switzerland facilities. For municipal water, residential and commercial water meters are classified as either manually read meters or remotely read meters through radio technology. A manually read meter consists of a water meter and a register that gives a visual meter reading display. Meters equipped with radio transmitters (endpoints) use encoder registers to convert the measurement data from the meter into an encrypted digital format which is then transmitted through radio frequency to a receiver that collects and formats the data appropriately for water utility billing systems. In an AMR system, a vehicle equipped for meter reading purposes, including a radio receiver, computer and reading software, collects the data from the utility's meters.
Fixed network advanced metering infrastructure (AM! I) systems continue to build interest among water utilities. These systems incorporate a network of permanent data collectors or gateway receivers that are always active or listening for the radio transmission from the utilities' meters. AMI systems eliminate the need for utility personnel to drive through service territories to collect meter reading data. These systems provide the utilities with more frequent and diverse data from the utilities' meters at specified intervals.
The Company�� advanced metering analytics (AMA), along with a host of automated utility management tools to facilitate the ability of water and gas utilities to increase their productivity and revenue, as well as proactively utilize their data. AMA is consists of ReadCenter Analytics software coupled with ORION SE two-way fixed network or GALAXY one-way fixed network technology, which is complemented by a family of accurate and reliable water meters. The ORION SE system can operate as a mobile AMR system, a fixed network AMI system, or both. Industrial flow and specialty products serve flow measurement and control applications across an industrial spectrum. Specialized communication protocols that control the entire flow measurement process drive these markets.
The Company competes with Sensus USA Inc., Neptune Technology Group, Inc., Elster AMCO Metering, LLC and Master Meter, Inc.
Advisors' Opinion:- [By Jeremy Bowman]
What: Shares of Badger Meter (NYSE: BMI ) weren't measuring up today, falling as much as 15% after reporting an much lower profits than expected in it first quarter.
Best Machinery Companies To Buy For 2014: IDEX Corp (IEX)
IDEX Corporation (IDEX), incorporated on September 24, 1987, is an applied solutions business that sells an array of pumps, flow meters and other fluidics systems and components and engineered products to customers in a variety of markets worldwide. All of the Company�� business activities are carried out through wholly owned subsidiaries. IDEX operates in three business segments: Fluid & Metering Technologies, Health & Science Technologies and Fire & Safety/Diversified Products. Reporting units in the Fluid & Metering Technologies segment consist of Banjo; Energy and Fuels (Energy); Chemical, Food & Process (CFP) and Water & Waste Water (Water). Reporting units in the Health & Science Technologies segment consist of IDEX Health & Science (IH&S); IDEX Optics and Photonics (IOP); Precision Polymer Engineering (PPE); Gast; Micropump and Materials Process Technologies (MPT). Reporting units in the Fire & Safety/Diversified Products segment consist of Fire Suppression; Rescue Tools and Band-It. In July 20, 2012, it acquired Matcon Group Limited. In March 2013, it announced the acquisition of FTL Seals Technology, Ltd. On April 11, 2012, the Company acquired the stock of PPC. On April 30, 2012, the Company acquired the stock of ERC.
Fluid & Metering Technologies Segment
The Fluid & Metering Technologies Segment designs, produces and distributes displacement pumps, flow meters, injectors, and other fluid-handling pump modules and systems and provides flow monitoring and other services for the water and wastewater industries. Fluid & Metering Technologies pump and metering solutions serve a range of end markets, including industrial infrastructure (fossil fuels, refined and alternative fuels, and water and wastewater), chemical processing, agricultural, food and beverage, pulp and paper, transportation, plastics and resins, electronics and electrical, construction and mining, pharmaceutical and bio-pharmaceutical, machinery and other markets. Fluid & Metering Technologies accounte! d for 43% of IDEX�� sales and 82% of IDEX�� operating income, with approximately 46% of its sales to customers outside the United States as of December 31, 2012, with approximately 46% of its sales to customers outside the United States. Banjo is a provider of pumps, valves, fittings and systems used in liquid handling. Banjo is based in Crawfordsville, Indiana and its products are used in agricultural and industrial applications. Approximately 11% of Banjo�� sales during 2012 were to customers outside the United States.
Energy consists of the Company�� Corken, Faure Herman, Liquid Controls, S.A.M.P.I. and Toptech businesses. Energy is a supplier of flow meters, electronic registration and control products, rotary vane and turbine pumps, reciprocating piston compressors, and terminal automation control systems. Energy has facilities in Longwood, Florida and Zwijndrech, Belgium (Toptech products), Oklahoma City, Oklahoma (Corken products), La Ferte Bernard, France (Faure Herman products), Vadodara, Gujarat, India (Liquid Controls products), and Altopascio, Italy (S.A.M.P.I. products). Applications for Liquid Controls and S.A.M.P.I. positive displacement flow meters, electronic, registration and control products include mobile and stationary metering installations for wholesale and retail distribution of petroleum and liquefied petroleum gas, aviation refueling, and industrial metering and dispensing of liquids and gases. Corken products consist of rotary vane pumps, single and multistage regenerative turbine pumps, and small horsepower reciprocating piston compressors. Toptech supplies terminal automation hardware and software to control and manage inventories, as well as transactional data and invoicing, to customers in the oil, gas and refined-fuels markets. Faure Herman is a supplier of ultrasonic and helical turbine flow meters used in the custody transfer and control of fluids and gases. Approximately 53% of Energy�� sales during 2012 were to customers outside the United State! s.
!
CFP consists of the Company�� Richter, Viking and Warren Rupp businesses. CFP is a producer of air-operated and motor-driven double-diaphragm pumps and replacement parts, lined pumps, valves and control equipment for the chemical, fine chemical and pharmaceutical industries, and external gear pumps. Richter�� corrosion resistant fluoroplastic lined products offer solutions for applications in the process industry. Viking�� products consist of external gear pumps, strainers and reducers, and related controls used for transferring and metering thin and viscous liquids sold under the Viking and Wright Flow brands and air-operated double-diaphragm pumps sold under the Blagdon brand. Markets served by Viking products include chemical, petroleum, pulp and paper, plastics, paints, inks, tanker trucks, compressor, construction, food and beverage, personal care, pharmaceutical and biotech. Warren Rupp products (which also include Pumper Parts and Versa-Matic products) are used for abrasive and semisolid materials, as well as for applications where product degradation is a concern or where electricity is not available or should not be used. Markets served by Warren Rupp products include chemical, paint, food processing, electronics, construction, utilities, mining and industrial maintenance. CFP maintains operations in Kampen, Germany (Richter products), Cedar Falls, Iowa (Richter and Viking products), Eastbourne, East Sussex, England, Shannon, Ireland (Viking products) and Mansfield, Ohio (Warren Rupp products). CFP primarily uses independent distributors to market and sell its products. Approximately 54% of CFP�� sales during 2012 were to customers outside the United States.
Water consists of the Company�� ADS, IETG, iPEK, Knight and Pulsafeeder businesses. Water is a provider of metering technology and flow monitoring products and underground surveillance services for water and wastewater markets, as well as a manufacturer of pumps and dispensing equipment for industrial laundries! , commerc! ial dishwashing and chemical metering, and a provider of metering pumps, special-purpose rotary pumps, peristaltic pumps, fully integrated pump and metering systems, custom chemical-feed systems, electronic controls and dispensing equipment. ADS�� products and services provide integrated solutions that enable industry, municipalities and government agencies to analyze and measure the capacity, quality and integrity of wastewater collection systems, including the maintenance and construction of such systems. IETG�� products and services enable water companies to manage their water distribution and sewerage networks, while its surveillance service specializes in underground asset detection and mapping for utilities and other private companies. iPEK supplies remote controlled systems used for infrastructure inspection. Knight is a manufacturer of pumps and dispensing equipment for industrial laundries, commercial dishwashing and chemical metering. Pulsafeeder products are used to introduce precise amounts of fluids into processes to manage water quality and chemical composition, as well as peristaltic pumps. Its markets include water and wastewater treatment, oil and gas, power generation, pulp and paper, chemical and hydrocarbon processing, and swimming pools. Water maintains operations in Huntsville, Alabama and various other locations in the United States, Sydney, New South Wales, Australia and Melbourne, Victoria, Australia (ADS products), Leeds, England (IETG products and services), Hirschegg, Austria, and Sulzberg, Germany (iPEK products), Lake Forest, California, Mississauga, Ontario, Canada, Eastbourne, East Sussex, England, Unanderra, Australia, and Ciudad Juarez, Chihuahua, Mexico (Knight products), Rochester, New York, Punta Gorda, Florida and Milan, Italy (Pulsafeeder products). Approximately 47% of Water�� sales during 2012 were to customers outside the United States.
Water Services & Technology (WST) consists of the Company�� ADS, IETG and iPEK businesses. WST is a provi! der of me! tering technology and flow monitoring products and underground surveillance services for wastewater markets. ADS�� products and services provide integrated solutions that enable industry, municipalities and government agencies to analyze and measure the capacity, quality and integrity of wastewater collection systems, including the maintenance and construction of such systems. IETG�� products and services enable water companies to manage their water distribution and sewerage networks, while its surveillance service specializes in underground asset detection and mapping for utilities and other private companies. iPEK supplies remote controlled systems used for infrastructure inspection. WST maintains operations in Huntsville, Alabama and various other locations in the United States and Australia (ADS products and services); Leeds, England (IETG products and services); and Hirschegg, Austria, and Sulzberg, Germany (iPEK products). Approximately 40% of WST�� 2012 sales were to customers outside the United States.
The Company competes with Pump Solutions Group, Dover Corporation, Milton Roy and Tuthill Corporation.
Health & Science Technologies Segment
The Health & Science Technologies Segment designs, produces and distributes a range of precision fluidics, rotary lobe pumps, centrifugal and positive displacement pumps, roll compaction and drying systems used in beverage, food processing, pharmaceutical and cosmetics, pneumatic components and sealing solutions, including pumping solutions required in analytical instrumentation, clinical diagnostics and drug discovery, molded and extruded, biocompatible medical devices and implantables, air compressors used in medical, dental and industrial applications, optical components and coatings for applications in the fields of scientific research, defense, aerospace, telecommunications and electronics manufacturing, laboratory and commercial equipment used in the production of micro and nano scale materials, precision pho! tonic sol! utions used in life sciences, research and defense markets, and precision gear and peristaltic pump technologies. The segment accounted for 35% of IDEX�� sales and 35% of operating income in 2012, with approximately 54% of its sales to customers outside the United States.
IH&S consists of Eastern Plastics, Rheodyne, Ismatec, Sapphire Engineering, Upchurch Scientific and ERC, which was acquired in April 2012. IH&S has facilities in Rohnert Park, California (Rheodyne products); Bristol, Connecticut (Eastern Plastics products); Wertheim-Mondfeld, Germany (Ismatec products); Middleboro, Massachusetts (Sapphire Engineering products); Oak Harbor, Washington (Ismatec and Upchurch Scientific products); and Kawaguchi, Japan (ERC products). Eastern Plastics products, which consist of high- precision integrated fluidics and associated engineered plastics solutions, are used in a set of end markets including medical diagnostics, analytical instrumentation, and laboratory automation. Rheodyne products consist of injectors, valves, fittings and accessories for the analytical instrumentation market. Rheodyne products are used by manufacturers of high pressure liquid chromatography equipment servicing the pharmaceutical, biotech, life science, food & beverage, and chemical markets. Ismatec products include peristaltic metering pumps, analytical process controllers, and sample preparation systems. Sapphire Engineering and Upchurch Scientific products consist of fluidic components and systems for the analytical, biotech and diagnostic instrumentation markets, such as fittings, precision-dispensing pumps and valves, tubing and integrated tubing assemblies, filter sensors and other micro-fluidic and nano-fluidic components, as well as advanced column hardware and accessories for the high performance liquid chromatography (HPLC) market. Sapphire Engineering and Upchurch Scientific products primarily serve the pharmaceutical, drug discovery, chemical, biochemical processing, genomics/proteomics research, envir! onmental ! labs, food/agriculture, medical lab, personal care, and plastics/polymer/rubber production markets. ERC manufactures gas liquid separations and detection solutions for the life science, analytical instrumentation and clinical chemistry markets. ERC�� products consist of in-line membrane vacuum degassing solutions, refractive index detectors and ozone generation systems. Approximately 52% of IH&S�� 2012 sales were to customers outside the United States.
IOP consists of CVI Melles Griot (CVI MG), Semrock and AT Films (the Precision Photonics portion of the AT Films business was acquired in April 2012). CVI MG is a into design and manufacture of precision photonic solutions used in the life sciences, research, semiconductor, security and defense markets. CVI MG�� products are focused on the generation, control and productive use of light for a variety of key science and industrial applications. Products consist of specialty lasers and light sources, electro-optical components, specialty shutters, opto-mechanical assemblies and components. In addition, CVI MG produces critical components for life science research, electronics manufacturing, military and other industrial applications including lenses, mirrors, filters and polarizers. These components are utilized in a number of applications such as spectroscopy, cytometry (cell counting), guidance systems for target designation, remote sensing, menology and optical lithography.
CVI MG is headquartered in Albuquerque, New Mexico, with additional manufacturing sites located in Carlsbad, California; Rochester, New York; Isle of Man, British Isles; Leicester, England; Kyongki-Do, Korea; Tokyo, Japan; Didam, The Netherlands; and Singapore. Semrock is a provider of optical filters for biotech and analytical instrumentation in the life sciences markets. Semrock�� optical filters are produced using state-of-the-art manufacturing processes which enable it to offer its customers improvements in instrument performance and reliability.! Semrock ! is located in Rochester, New York. AT Films specializes in optical components and coatings for applications in the fields of scientific research, defense, aerospace, telecommunications and electronics manufacturing. The Precision Photonics portion of its business specializes in optical components and coatings for applications in the fields of scientific research, aerospace, telecommunications and electronics manufacturing. AT Films is headquartered in Boulder, Colorado. Approximately 57% of IOP�� 2012 sales were to customers outside the United Sates.
Containment consists of Precision Polymer Engineering (PPE). PPE, which is located in Blackburn, England, is a provider of high performance seals and advanced sealing solutions for a diverse range of global industries and applications, including hazardous duty, analytical instrumentation, semiconductor/solar, process technologies, pharmaceutical, electronics, and food applications. Approximately 79% of PPE�� 2012 sales were to customers outside the United States.
Gast consists of the Company�� Gast and Jun-Air businesses. The Gast business is a manufacturer of air-moving products, including air motors, low-range and medium-range vacuum pumps, vacuum generators, regenerative blowers and fractional horsepower compressors. Gast products are used in a variety of long-life applications requiring a quiet, clean source of moderate vacuum or pressure. Gast products primarily serve the medical equipment, environmental equipment, computers and electronics, printing machinery, paint mixing machinery, packaging machinery, graphic arts, and industrial manufacturing markets. The Jun-Air business is a provider of low-decibel, ultra-quiet vacuum compressors suitable for medical, dental and laboratory applications. Based in Benton Harbor, Michigan, Gast also has a logistics and commercial center in Redditch, England. Approximately 27% of Gast�� 2012 sales were to customers outside the United States.
Micropump, headquartered i! n Vancouv! er, Washington, produces, precision-engineered, magnetically and electromagnetically driven rotary gear, piston and centrifugal pumps. Micropump products are used in low-flow abrasive and corrosive applications. Micropump products primarily serve the printing machinery, medical equipment, paints and inks, chemical processing, pharmaceutical, refining, laboratory, electronics, pulp and paper, water treatment, textiles, peristaltic metering pumps, analytical process controllers and sample preparation systems markets. Approximately 77% of Micropump�� 2012 sales were to customers outside the United States.
MPT consists of Quadro, Fitzpatrick, Microfluidics and Matcon Group Limited (Matcon), which was acquired in July 2012. Quadro is a provider of particle control solutions for the pharmaceutical and bio-pharmaceutical markets. Based in Waterloo, Ontario, Canada, Quadro�� activities include fine milling, emulsification and special handling of liquid and solid particulates for laboratory, pilot phase and production scale processing within the pharmaceutical and bio-pharmaceutical markets. Fitzpatrick is into the design and manufacture of process technologies for the pharmaceutical, food and personal care markets. Fitzpatrick designs and manufactures customized size reduction, roll compaction and drying systems to support their customers��product development and manufacturing processes. Fitzpatrick is headquartered in Elmhurst, Illinois. Microfluidics is into designing and manufacturing of laboratory and commercial equipment used in the production of micro and nano scale materials for the pharmaceutical and chemical markets. Microfluidics is the producer of the Microfluidizer family of high shear fluid processors for uniform particle size reduction, robust cell disruption and nanoparticle creation. Microfluidics has offices in Newton, Massachusetts. Matcon is into material processing solutions for high value powders used in the manufacture of pharmaceuticals, food, plastics, and fine chemic! als.
!Matcon�� products consist of the original cone valve powder discharge system and filling, mixing and packaging systems, all of which support its customers��automation and process requirements. Matcon is located in Evesham, Worcestershire, England. Approximately 61% of MPT�� 2012 sales were to customers outside the United States.
The Company competes with Gardner Denver, Inc., Thermo Scientific Dionex, Gooch & Housego PLC, Parker Hannifin and Valco Instruments Co., Inc.
Fire & Safety/Diversified Products Segment
The Fire & Safety/Diversified Products segment produces firefighting pumps and controls, rescue tools, lifting bags and other components and systems for the fire and rescue industry, engineered stainless steel banding and clamping devices used in a variety of industrial and commercial applications, and precision equipment for dispensing, metering and mixing colorants and paints used in a variety of retail and commercial businesses around the world. The segment accounted for 22% of IDEX�� sales and 53% of IDEX�� operating income in 2012, with approximately 56% of its sales to customers outside the United States.
Fire Suppression consists of the Company�� Class I, Hale and Godiva businesses, which produce truck-mounted and portable fire pumps, stainless steel valves, foam and compressed air foam systems, pump modules and pump kits, electronic controls and information systems, conventional and networked electrical systems, and mechanical components for the fire, rescue and specialty vehicle markets. Fire Suppression�� customers are primarily OEMs. Fire Suppression is headquartered in Ocala, Florida (Class 1 and Hale products), with additional facilities located in Warwick, England (Godiva products). Approximately 41% of Fire Suppression�� 2012 sales were to customers outside the United States.
Rescue consists of the Company�� Dinglee, Hurst Jaws of Life, Lukas and Vetter businesses, which produce hydraulic! , battery! , gas and electric-operated rescue equipment, hydraulic re-railing equipment, hydraulic tools for industrial applications, recycling cutters, pneumatic lifting and sealing bags for vehicle and aircraft rescue, environmental protection and disaster control, and shoring equipment for vehicular or structural collapse. Rescue Tool�� customers are primarily public and private fire and rescue organizations. Rescue has facilities in Shelby, North Carolina (Hurst Jaws of Life products); Tianjin, China (Dinglee products); Erlangen, Germany (Lukas products); and Zulpich, Germany (Vetter products). Approximately 75% of Rescue�� 2012 sales were to customers outside the United States.
Band-It is a producer of stainless steel banding, buckles and clamping systems. Band-It products are used for securing exhaust system heat and sound shields, industrial hose fittings, traffic signs and signals, electrical cable shielding, identification and bundling, and in numerous other industrial and commercial applications. Band-It products primarily serve the automotive, transportation equipment, oil and gas, general industrial maintenance, electronics, electrical, communications, aerospace, utility, municipal and subsea marine markets. Band-It is based in Denver, Colorado, with additional operations in Staveley, Derbyshire, England, and a IDEX shared manufacturing facility in China. Approximately 39% of Band-It�� 2012 sales were to customers outside the United States.
Dispensing Equipment produces precision equipment for dispensing, metering and mixing colorants and paints used in a variety of retail and commercial businesses worldwide. Dispensing Equipment is a global supplier of precision-designed tinting, mixing, dispensing and measuring equipment for auto refinishing and architectural paints. Dispensing Equipment products are used in retail and commercial stores, hardware stores, home centers, department stores, automotive body shops as well as point-of-purchase dispensers. Dispensing Equipmen! t is head! quartered in Wheeling, Illinois with additional facilities in Sassenheim, The Netherlands; Unanderra, Australia; and Milan, Italy, as well as IDEX shared manufacturing facilities in India and China. Approximately 59% of Dispensing Equipment�� 2012 sales were to customers outside the United States.
The Company competes with American Cast Iron Pipe Company, Holmatro, Inc., Nordic Capital and Panduit Corporation.
Advisors' Opinion:- [By Ben Levisohn]
Xylem’s big day has also boosted other water-infrastructure stocks. Flowserve (FLS) has gained 1.2% to $70.59, Idex Corp. (IEX) has risen 0.5% to $68.69 and Thermo Fisher Scientific (TMO) has advanced 0.4% t0 $98.22.
Best Machinery Companies To Buy For 2014: Westinghouse Air Brake Technologies Corp (WAB)
Westinghouse Air Brake Technologies Corporation (Wabtec), doing business as Wabtec Corporation, is a providers of value-added, technology-based equipment and services for the global rail industry. It provides its products and services through two business segments: the Freight Group and the Transit Group, both of which have different market characteristics and business drivers. Effective November 18, 2011, Wabtec acquired Fulmer Company, a manufacturer of motor components for rail, power generation and other industrial markets. Effective November 3, 2011, Wabtec acquired Bearward Engineering, a manufacturer of cooling systems and related equipment for power generation and other industrial markets. On June 29, 2011, the Company acquired an aftermarket transit parts business from GE Transportation, a parts supply business for propulsion and control systems for the passenger transit car aftermarket in North America. On February 25, 2011, the Company acquired Brush Traction Group, a provider of locomotive overhauls, services and aftermarket components. In July 2012, it acquired Tec Tran Corp. and its affiliates. In October 2012, it acquired LH Group. Effective July 30, 2013, Westinghouse Air Brake Technologies Corp acquired Turbonetics Inc, a manufacturer of turbochargers and components. Effective September 24, 2013, Westinghouse Air Brake Technologies Corp acquired Longwood Industries Inc.
The Freight Group manufactures and services components for freight cars and locomotives, builds new switcher locomotives, rebuilds freight locomotives, supplies railway electronics, positive train control equipment, signal design and engineering services, and provides related heat exchange and cooling systems. Its customers include railroads, leasing companies, manufacturers of original equipment, such as locomotives and freight cars, and utilities. During the year ended December 31, 2011, the Freight Group accounted for 61% of its total sales, with about 75% of its sales in North America and the remainder! to international customers.
The Transit Group manufactures and services components for new and existing passenger transit vehicles, which include subway cars and buses, builds new commuter locomotives and refurbishes subway cars. Customers include public transit authorities and municipalities, leasing companies, and manufacturers of subway cars and buses globally. During 2011, the Transit Group accounted for 39% of its total sales, with about half of its sales in North America and the remainder to international customers. During 2011, about 66% of the Transit Group�� sales are in the aftermarket and the remainder in the original equipment market.
The Company�� specialty products and electronics include positive train control equipment and electronically controlled pneumatic braking products; railway electronics, including event recorders, monitoring equipment and end of train devices; signal design and engineering services; freight car truck components; draft gears, couplers and slack adjusters; air compressors and dryers; heat exchangers and cooling products for locomotives and power generation equipment, and track and switch products. Its brake products include railway braking equipment and related components for freight and transit applications, and friction products, including brake shoes and pads. Its remanufacturing, overhaul and build products include new commuter and switcher locomotives, and transit car and locomotive overhaul and refurbishment. Its transit products include rail and bus door and window assemblies; accessibility lifts and ramps for buses and subway cars, and traction motors.
The Company competes with Knorr-Bremse AG, Electro-Motive Diesel, GE Transportation Systems and Faiveley Transport.
Advisors' Opinion:- [By Rich Duprey]
The board of directors of railroad products manufacturer Wabtec (NYSE: WAB ) was busy yesterday, announcing it was increasing its quarterly dividend payment by 60% while simultaneously splitting the company's stock.
Best Machinery Companies To Buy For 2014: GT Advanced Technologies Inc (GTAT)
GT Advanced Technologies Inc., incorporated on September 27, 2006, is diversified technology company with crystal growth equipment and solutions for the global solar, light emitting diode (LED) and electronics industries. The Company operates in three segments: its polysilicon business, its photovoltaic (PV), business and its sapphire business. The Company's principal products are Silicon Deposition Reactors (SDR) and related equipment used to produce polysilicon, the key raw material used in silicon-based solar wafers and cells; Advanced sapphire crystallization furnaces (ASF) which are used to crystallize sapphire boules, and Directional solidification (DSS) furnaces and related equipment used to cast multicrystalline and MonoCast crystalline silicon ingots. On January 7, 2013, the Company announced the idling of its HiCz pilot manufacturing facility in Hazelwood, Missouri. On November 8, 2012, the Company acquired certain assets of Twin Creeks Technologies, Inc. (Twin Creeks). In May 2013, the Company acquired the business of Thermal Technology LLC.
PV Business
The focus of the Company's PV business is the development, manufacture and sales of crystallization growth furnaces to produce silicon ingots used in the production of solar wafers. The Company's principal product line has been the DSS family of casting furnaces that are used to produce multicrystalline ingots and MonoCast ingots. As of December 31, 2012, the Company shipped approximately 3,300 DSS crystallization furnaces. The ingots are used to make photovoltaic (PV) solar wafers and cells. HiCz, or continuous Czochralski (Cz) growth process, produces monocrystalline ingots that are designed to produce more efficient wafers. The Company�� DSS furnace is a specialized furnace used to melt polysilicon and cast multicrystalline ingots. Multicrystalline ingots are used to produce solar wafers, which ultimately become solar cells. The Company markets its DSS crystallization furnaces under the names DSS450HP and DSS6! 50. The Company's largest capacity DSS furnace, the DSS650, is capable of producing ingots that weigh up to 650 kilograms using standard silicon feedstock. In January 2012, the Company introduced its MonoCast silicon casting technology that uses the DSS furnace architecture to produce ingots comprised of a high percentage of monocrystalline material. The Company is markets MonoCast technology under the name DSS450 MonoCast.
The Company�� ancillary equipment provides operators with material handling assistance during the preparation of the crucible before it is loaded with silicon and during the loading and unloading of the crucible into the DSS furnace chamber at the start of the growth process and out of the DSS furnace chamber at the conclusion of the ingot growth process. The Company's ancillary equipment includes crucible coating stations, crucible manipulators, loaders/unloaders, extraction tools and other material handling systems required to safely transport material during the ingot growth process. The Company sells replacement parts and consumables used in its DSS furnaces and other PV equipment.
Polysilicon Business
The Company's polysilicon business offers Silicon Deposition Reactors, which utilize the chemical vapor deposition process, and related trichlorosilane (TCS) technology and equipment along with engineering services to existing polysilicon producers and new market entrants. The Company's polysilicon business focuses on product design, quality control, engineering services, project management and process development related to the production of polysilicon. It markets its SDR reactors under the names SDR300, SDR400, SDR 500 and SDR 600. The Company provides equipment, technology and engineering services for the production and purification of TCSand silane. This hydrochlorination technology eliminates the need for silicon tetrachloride converters which are required when using certain other polysilicon production technology. The Company also pr! ovides an! cillary equipment and technologies for producing seed rods used in its SDR reactors and for handling and processing the polysilicon rods into a finished product.
Sapphire Business
The Company's sapphire business markets and sells of the Company's ASF systems to customers to enable them to produce sapphire material. The Company also produces sapphire material, on a limited basis, for the LED and other specialty markets at its sapphire pilot production facility in Massachusetts. Its ASF systems produce monocrystalline sapphire material, referred to as sapphire boules. The sapphire boules are used to make sapphire wafers, a substrate for manufacturing LEDs, as well as sapphire blanks and windows for such applications as medical devices and watch crystals. The Company's ASF technology is based on the heat exchanger method (HEM), which is a directional solidification technique, which crystallizes the sapphire meltstock material during the growth process. The Company also uses the facility as a research and development (R&D) center to test new technology developments prior to commercial release. The Company markets and sells its ASF systems under the name ASF100. The Company also provides engineering and product design, quality control, process engineering, engineering services and field services related to the operation of its ASF furnaces. The Company produces sapphire material on a limited basis at its pilot production facility in Massachusetts. The Company sells this material to customers in the LED and other markets, such as the aerospace, defenses and medical device.
The Company manufactures and sells two principal types of sapphire materials: hems Sapphire Material and Titanium-doped Sapphire (Ti:Sapphire) Material. Using the material derives from the sapphire boule generated with its ASF furnaces, the Company cut the sapphire material in a number of different dimensions and crystal orientations, in form factors such as cores, rods, blanks, windows and tubes. The! Company ! generates sapphire boules that are doped with titanium. The Company provides certain finishing and polishing for its Ti:Sapphire material.
The Company competes with ALD Vacuum Technologies AG, JYT Corporation, Ferrotec Corporation, PVA TePla AG, Centrotherm Elektrische Anlagen GmbH & Co., Jing Gong Technology, Zhejiang Jingsheng Mechanical & Electrical Co., Ltd, MSA Apparatus Construction for Chemical Equipment Ltd, Centrotherm Elektrische Anlagen GmbH & Co., Morimatsu Industry Co. Ltd., Poly Plant Project, Inc., Hemlock Semiconductor Corporation, Wacker Chemie AG, MEMC Electronic Materials, Inc., Renewable Energy Corporation ASA, Thermal Technology LLC, Advanced Renewable Energy Company, LLC, Rubicon Technology, Inc., Sapphire Technology Co. Ltd. (Korea), Kyocera International Inc., Saint-Gobain, Gavish Inc., and Monocrystal.
Advisors' Opinion:- [By John Udovich]
Solar stocks have not exactly given buy and hold investors a smooth ride, but small cap�GT Advanced Technologies Inc (NASDAQ: GTAT) could be an interesting materials play on the solar sector���meaning its worth taking a closer look at the stock along with potential peers like Ascent Solar Technologies, Inc (NASDAQ: ASTI) and STR Holdings, Inc (NYSE: STRI) plus solar ETF Guggenheim Solar ETF (NYSEARCA: TAN). I should mention that just last week, we added GT Advanced Technologies to our�SmallCap Network Elite Opportunity (SCN EO) portfolio for both�fundamentals and technical reasons and we are already up almost 9%.
- [By Steve Symington]
A little more than a month ago, I poked and prodded�at�GT Advanced Technologies (NASDAQ: GTAT ) to try and determine whether the stock might actually be able to regain even a fraction of its former glory.
Best Machinery Companies To Buy For 2014: Terex Corporation(TEX)
Terex Corporation manufactures capital goods machinery products worldwide. Its Aerial Work Platforms segment offers portable material lifts, portable aerial work platforms, trailer-mounted articulating booms and light towers, self-propelled articulating and telescopic booms, scissor lifts, telehandlers, and bridge inspection and utility equipment under the Terex and Genie brands. The company?s Construction segment provides off-highway trucks and material handlers; loader backhoes, compaction equipment, mini and midi excavators, site dumpers, compact track loaders, skid steer loaders, wheel loaders, and tunneling equipment; and asphalt and concrete equipment, and landfill compactors principally under the Terex name. Its Cranes segment offers mobile telescopic and tower cranes, lattice boom crawler and truck cranes, and truck-mounted cranes; and straddle and sprinter carriers, gantry cranes, ship-to-shore cranes, reach stackers, empty and full container handlers, and genera l cargo lift trucks under the Terex brand. The company?s Material Handling and Port Solutions segment provides standard and process cranes, rope and chain hoists, electric motors, and light crane systems; and crane components and port equipment, such as mobile harbor and automated stacking cranes, and automated guided vehicles, as well as terminal automation technology, including software under the Demag and Gottwald names. Its Materials Processing segment offers crushers, washing systems, screens, apron feeders, chippers, and related components and replacement parts under the Terex and Powerscreen brands. The company provides financing solutions to assist customers in the rental, leasing, and acquisition of its products. It serves construction, infrastructure, quarrying, mining, manufacturing, shipping, transportation, refining, energy, and utility industries through dealers, rental companies, direct sales, and major accounts. The company was founded in 1925 and is based i n Westport, Connecticut.
Advisors' Opinion:- [By Jeremy Bowman]
What: Shares of Terex� (NYSE: TEX ) were collapsing today, falling as much as 16% after cutting its forecast for the quarter and full year.
- [By Rich Smith]
This series, brought to you by Yahoo! Finance, looks at which upgrades and downgrades make sense, and which ones investors should act on. Today, our headlines feature a pair of new buy ratings for heavy industrialists Manitowoc (NYSE: MTW ) and Terex (NYSE: TEX ) . But the news isn't all good, so before we get to those, let's find out first why one analyst thinks...
Best Machinery Companies To Buy For 2014: Toro Co (TTC)
The Toro Company (Toro), incorporated on November 7, 1983, designs, manufactures, and markets professional turf maintenance equipment and services, turf irrigation systems, agricultural micro-irrigation systems, landscaping equipment and lighting, and residential yard and snow removal products. The Company operates in three business segments: Professional, Residential, and Distribution. Its products are advertised and sold at the retail level under the names of Toro, Exmark, Irritrol, Hayter, Pope, Lawn-Boy and Lawn Genie. In October 2013, the Company acquired Xiamen Xiangfeng Water Saving Equipment Co., Ltd.
Professional
The Company designs professional turf, landscape, and agricultural products and markets them worldwide through a network of distributors and dealers, as well as directly to Government customers, rental companies, and retailers. These channel partners then sell its products to professional users engaged in creating and renovating landscapes, irrigating turf and agricultural fields, and maintaining turf, such as golf courses, sports fields, municipal properties, and residential and commercial landscapes.
Landscape Contractor Market
The Company market products to landscape contractors under the Toro and Exmark brands. Products for the landscape contractor market include zero-turn radius riding mowers, heavy-duty walk behind mowers, mid-size walk behind mowers, stand-on mowers, and turf renovation and tree care equipment. It also offers some products with electronic fuel injection engine options. In fiscal 2013, it enhanced its line of Toro Z Master Commercial 3000 Series mowers, featuring its TURBO FORCE cutting deck, integrated pump, and wheel motors designed for professional results, performance, and dependability. In addition, in fiscal 2013, it introduced the new Exmark Vantage X-Series stand-on mower.
Sports Fields and Grounds Market
Products for the sports fields and grounds market include riding rotar! y mowers and attachments, aerators, and debris management products, which include versatile debris vacuums, blowers, and sweepers. Other products include multipurpose vehicles, such as the Toro Workman, that can be used for turf maintenance, towing, and industrial hauling. These products are sold through distributors, who then sell to owners and/or managers of sports fields, Governmental properties, and residential and commercial landscapes.
Golf Course Market
The Company�� products for the golf course market include large reel and rotary riding products for fairway, rough and trim cutting; riding and walking mowers for putting greens and specialty areas; greens rollers; turf sprayer equipment; utility vehicles; aeration equipment; and bunker maintenance equipment. In fiscal 2013, it introduced the Reelmaster 3550-D, which features a productive 82 inch cutting width, enhanced ground-following capability with turf-friendly tires, and three-wheel drive system designed for traction in hilly and wet conditions. In addition, in fiscal 2013, it began offering versions of its golf products which are compliant with Tier 4 diesel engine emission requirements. It also manufacture and market underground irrigation systems for the golf course market, including sprinkler heads, controllers, turf sensors, and electric, battery-operated, and hydraulic valves. Its 835S/855S Series golf sprinklers are equipped with a unique TruJectory feature that provides enhanced water distribution control. Its Turf Guard wireless soil monitoring systems are designed to measure soil moisture, salinity, and temperature through buried wireless sensors that communicate through an Internet server for processing and presentation to a user through the Web.
Residential/Commercial Irrigation and Lighting Market
Turf irrigation products marketed under the Toro and Irritrol brands include rotors; sprinkler bodies and nozzles; plastic and brass valves; drip tubing and subsurface irrigation; ! electric ! and hydraulic control devices; and wired and wireless rain, freeze, and climate sensors. These products are designed to be used in residential and commercial turf irrigation systems that are installed into new systems or used to replace or retrofit existing systems. Most of the product lines are designed for underground automatic irrigation. Electric and hydraulic controllers activate valves and sprinkler bodies and nozzles in a typical irrigation system. Its retail irrigation products are marketed under the Toro and Lawn Genie brand names. These products are designed for homeowner installation and include sprinkler heads, valves, timers, and drip irrigation systems. Its ECXTRA sprinkler timers can be used with a home computer and its Scheduling Advisor recommends the proper watering schedule based on the local weather, plant type, and sprinkler. It manufactures and market lighting products under the Unique Lighting Systems brand name.
Micro-Irrigation Market
Products for the micro-irrigation market include products that regulate the flow of water for drip irrigation, including Aqua-Traxx PBX drip tape, Aqua-Traxx PC (pressure-compensating) drip tape, Blue Stripe polyethylene tubing, BlueLine drip line, and NGE emitters, all used in agriculture, mining, and landscape applications. In addition to these products, it offers control devices and connection options. These products are sold primarily through dealers and distributors who then sell to end users for use primarily in vegetable fields, fruit and nut orchards, vineyards, landscapes, and mines. In fiscal 2013, it expanded its product offering of the Neptune thinwall dripline into the North America market, featuring a medium-durability dripline that enables growers to install a subsurface drip irrigation system designed to last for up to ten years and to allow growers of medium-length crops to adopt drip irrigation. In addition, in fiscal 2013, it introduced AquaFlow 3.2 Drip Irrigation Design Software, a new software packag! e used to! help design drip irrigation systems.
Rental and Construction Market
The Company offers over 35 attachments for our compact utility loaders, including trenchers, augers, vibratory plows, and backhoes. In fiscal 2013, it launched the STX-38 Stump Grinder featuring high maneuverability and hydraulic sweep control. Products for the rental market include compact utility loaders, walk-behind trenchers, stump grinders, and turf renovation products, many of which are also sold to landscape contractors. Its presence in the construction market is driven by an equipment line of vibratory plows, trenchers, and horizontal directional drills, all of which are used in the installation, repair, and replacement of underground utilities with minimal impact on surrounding landscapes or structures. In fiscal 2013, it introduced the Toro Pro Sneak Vibratory Plow that delivers consistent and powerful plowing in a compact, maneuverable package.
Residential
The Company markets its residential products to homeowners through a variety of distribution channels, including outdoor power equipment dealers, hardware retailers, home centers, mass retailers, and over the Internet. These products are sold mainly in North America, Europe, and Australia, with the exception of snow removal products that are sold primarily in North America and Europe.
Walk Power Mower Products
The Company manufactures and markets a number of walk power mower models under its Toro and Lawn-Boy brand names, as well as the Pope brand in Australia and the Hayter brand in the United Kingdom. Toro also offers a line of rear-roller walk power mowers, a design that provides a striped finish, for the United Kingdom market.
Riding Products
The Company manufactures and markets riding products under the Toro brand name worldwide and under the Hayter brand name in the United Kingdom. Riding products primarily consist of zero-turn radius mowers. Lawn and garden tra! ctor mode! ls are sold worldwide. In addition, its rear engine and direct-collect riding mowers are manufactured and sold in the European market. A number of models are available with a variety of engines, decks, transmissions, and accessories.
Home Solutions Products
Toro designs and markets home solutions products under the Toro and Pope brand names, including electric and battery-operated grass trimmers, electric blower-vacuums, electric blowers, and electric snow throwers. In Australia, the Company also designs and markets underground and hose-end retail irrigation products under the Pope brand name.
Gas Snow Removal Products
The Company manufactures and markets a range of gas-powered single-stage and two-stage snow thrower models. Single-stage snow throwers are walk behind units with lightweight two- and four-cycle gasoline engines. Its two-stage snow throwers are designed for large areas of deep, heavy snow and use four-cycle engines. The Company�� two-stage snow throwers include a line of models featuring the Power Max auger system and the Quick Stick chute control technology.
Advisors' Opinion:- [By Ben Levisohn]
Shares of Deere have dropped 0.7% to $93.65 at 3:49 p.m. today, while Agco (AGCO) has dipped 0.1% to $55.12, Toro (TTC) has gained 1% to $65.17 and Caterpillar (CAT) has risen 1.2% to $106.27.
Best Machinery Companies To Buy For 2014: Dover Corp (DOV)
Dover Corporation (Dover), incorporated in 1947, manufactures a range of specialized products and components and also offers related services and consumables. The Company operates in four segments: Communication Technologies, Energy, Engineered Systems, and Printing & Identification. In July 2011, it acquired Sound Solutions from NXP Semiconductors N.V. In September 2011, the Company sold Crenlo, LLC and Paladin Brands of Cedar Rapids. In October 2011, the Company acquired Oil Lift Technology. In November 2011, it acquired Advansor A/S. In November 2011, the Company realigned into four business segments, which includes Communication Technologies, Energy, Engineered Systems and Printing & Identification. In December 2011, the Company sold Heil Trailer International. In March 2012, the Company acquired Maag Group (Maag).
Communication Technologies
Dover Communication Technologies is engaged in the design and manufacture of products and components in the communications, life sciences, aerospace/industrial, defense, and telecommunication/other markets. The Company�� Communication Technologies focuses on markets, such as life sciences, aerospace/industrial, defense and telecommunication/other. Communication Technologies��products are manufactured primarily in North America, Europe and Asia. Its businesses serves the communications market design, manufacture and assemble micro-acoustic audio input and output components for use principally in personal mobile handsets. Life sciences businesses serves the life sciences market manufacture advanced miniaturized receivers and electromechanical components for use in hearing aids, connectors for use in a variety of medical devices and bio processing applications, and specialized components for use in implantable devices and medical equipment. Its aerospace/industrial businesses serves the aerospace/industrial markets manufacture precision engineered components and aftermarket parts across a range of market applications. In the commerci! al aerospace market, its businesses design and manufacture specialty hydraulics, fasteners, bearings, switches and filters sold to both original equipment manufacturers (OEMs) and as aftermarket products. It also design and manufacture frequency control components, electromechanical switches, multi-layered capacitors, filters and quick disconnect couplings serving the general industrial markets. Its defense businesses serves the defense market manufacture specialty hydraulics, mechanical and frequency control communication components, serving shipboard applications, strategic mission critical parts on key Airborne programs and Command and Control communications. Its telecommunication/other businesses serves the telecommunication/other markets manufacture frequency control components for wired and wireless network base station communications that ensure precise signal timing and filters for non-interrupted access across high speed networks.
Energy
The Company�� Energy segment serves the oil, gas and power generation industries. It consists of lines of business, which include drilling, production and downstream. The drilling businesses serves the drilling market design and manufacture products, including long-lasting polycrystalline diamond cutters (PDCs) for applications in down-hole drilling tools and quartz pressure transducers and hybrid electronics used in down-hole tools and monitoring devices. Its production businesses serves the production market design and manufacture products and components that facilitate the extraction and movement of fuel from the ground, including steel sucker rods, down-hole rod pumps, progressive cavity pumps and drive systems, plunger lifts, and accessories used in artificial lift applications in oil and gas production; pressure, temperature and flow monitoring equipment used in oil and gas exploration and production applications, and control valves and instrumentation for oil and gas production. In addition, these businesses manufacture vario! us compre! ssor parts that are being used in the natural gas production, distribution and oil refining markets; and winches, hoists, gear drives, swing drives, auger drives, slewing ring bearings, hydraulic pump and electronic monitoring solutions for energy, infrastructure and recovery markets worldwide. Its downstream businesses serve the downstream market produce systems and products that support transportation and handling of fuel, hazardous liquids and dry-bulk commodities. Vehicle fuel dispensing products include conventional, vapor recovery, and clean energy (liquid petroleum gas (LPG), compressed natural gas, and Hydrogen) nozzles, swivels and breakaways, as well as tank pressure management systems. Products manufactured for the transportation, storage and processing of hazardous liquid and dry-bulk commodities include relief valves, loading/unloading angle valves, rupture disc devices, actuator systems, level measurement gauges, swivel joints, butterfly valves, lined ball valves, aeration systems, industrial access ports, manholes, hatches, collars, weld rings and fill covers. In addition, it offer bearings, bearing isolators, seals and remote condition monitoring systems that are used for rotating machinery applications, such as turbo machinery, motors, generators and compressors used in energy, utility, marine and other industries.
Engineered Systems
Dover Engineered Systems is engaged in the fluids systems, refrigeration and food equipment, waste and recycling, and industrial markets. Dover Engineered Systems combines its engineering technology, product advantages, and applications to address market needs and requirements.
The Fluid Solutions platform designs and manufactures pumps, compressors, and chemical proportioning and dispensing products. The pumps and compressors are used to transfer liquid and bulk products and are sold to a wide variety of markets, including the refined fuels, LPG, pulp and paper, wastewater, food/sanitary, military, transportation and ! chemical ! process industries. The pumps include centrifugal, reciprocating (double diaphragm) and rotary pumps that are used in demanding and specialized fluid transfer process applications. The chemical portioning and dispensing systems are used to dilute and dispense concentrated cleaning chemicals and are sold to the food service, health care, supermarket, institutional, school, building service contractor and industrial markets. In addition, the platform manufactures copper-brazed compact heat exchangers, and designs software for heating and cooling substations. Fluid Solutions products are manufactured in the United States, South America, Asia and Europe. Its refrigeration and food equipment businesses manufacture refrigeration systems, refrigeration display cases, walk-in coolers and freezers, electrical distribution products and engineering services, commercial foodservice equipment, cook-chill production systems, custom food storage and preparation products, kitchen ventilation systems, conveyer systems, beverage can-making machinery, and packaging machines used for meat, poultry and other food products. The waste and recycling business in the solid waste management market provides products and services for the refuse collection industry and for on-site processing and compaction of trash and recyclable materials. Products are sold to municipal customers, national accounts and independent waste haulers through a network of distributors and directly in certain geographic areas. The Company also serves the vehicle service and industrial automation markets, providing a range of products and services that are utilized in vehicle services, maintenance, washing, repair and modification. The businesses in the industrial automation market provide a range of modular automation components including manual clamps, power clamps, rotary and linear mechanical indexers, conveyors, pick and place units, glove ports and manipulators as well as end-of-arm robotic grippers, slides and end effectors. These products serve a ra! nge of ma! rket, including food processing, packaging, paper processing, medical, electronic, automotive, nuclear, and general industrial products. These products are produced in the North America, Europe and Asia.
Printing & Identification
Dover Printing & Identification is a supplier of precision marking and coding, dispensing, printing, soldering, coating, inspection and testing equipment and related consumables and services. It provides its services in fast moving consumer goods (FMCG), industrial, and electronics.
FMCG businesses serves this market primarily design and manufacture marking and coding products used for printing variable information, such as date codes and serial numbers on food, beverage, consumer goods, and pharmaceutical products. Its industrial products used by the industrial market are primarily marking and coding, bar code and portable printers, and fluid dispensing related products serving a number of industrial end markets, including aerospace, cable, military, material packaging, industrial assembly, and medical devices. Additional products include a range of marking solutions leveraged for secondary packaging, such as cartons and pallets for use in warehouse logistics operations, and bar code printers and portable printers.
Advisors' Opinion:- [By Monica Gerson]
Dover (NYSE: DOV) is expected to report its Q1 earnings at $1.01 per share on revenue of $1.87 billion.
Pepsico (NYSE: PEP) is estimated to report its Q1 earnings at $0.75 per share on revenue of $12.40 billion.
- [By Holly LaFon]
��Diversified machinery manufacturer Dover Corp. (DOV) responded favorably to renewed organic sales growth, improving margins, and an improved outlook for its Communications Technologies business.
- [By Richard Moroney, Editor, Dow Theory Forecasts]
Dover (DOV), a maker of specialized industrial products and manufacturing equipment, is being initiated as a Long-Term Buy. Dover announced a 7% hike to its quarterly dividend in August, marking 58 straight years of increases.
No comments:
Post a Comment